Prop 65 Warning


Product's may contain one or more substances or chemicals known to the State of California to cause cancer, birth defects, or reproductive harm.

View By Supplier

    Featured Brands

Product Detail

Show Larger Photo

Part #MLR907583

  • Input Power: 208/230 Volts, 1-Phase, 50/60 Hz
  • Rated Output: 60 Amps at 140 VDC, 40% duty cycle (230V), 40% duty cycle (208V)
  • Welding Amperage Range: 20- 60 Amps
  • Weight: 49 lbs.
  • Pressure Flow: 6.75 SCFM (191 L/min.) at 90 PSI (621 kPa) 120 PSI MAX (828 kPa)
Manufacturer: Miller Electric
Air Plasma Cutting & Gouging
Price: $2,715.00 Each
Spec Sheet
Truck or Mfg. Direct Ship Only

Learn more by watching the MILLER SPECTRUM 875 Video.

Big cutting power in a small package - the industry's most portable and powerful 60-amp plasma cutter offers 7/8 in. mild steel cutting. Available in hand torch configurations as well as CNC/Automation long and short body machine torch models.

Special Features:

  • The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements
  • Ultra-Quick Connect Torch and work cable offers the fastest plasma torch and work cable connection and removal in the industry.
  • Wind Tunnel Technology prevents abrasive dust and particles from damaging internal components. Fan-On-Demand cooling system operates only when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit.
  • Ultra-Quick Connect Work Cable & Clamp makes for fast and easy setup and storage. The new ultra flexible Quick Connect work lead comes with a smaller heavy duty clamp.
  • For end user convenience, the unit has no pressure gauge or manual regulator knob. The unit automatically adjusts the air pressure to the torch for optimum cutting and gouging. No adjustments necessary.
  • Factory ready CNC/Automation models are available in long or short body torches as well as retrofit kits to convert hand held machines to be capable of CNC/Automation cutting.
  • Can Be Powered by Miller Engine Drive/Generator with generator power at or above 10 kW (e.g. Bobcat) or equivalent competitive equipment.
  • Provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal, all automatically. No need for manual re-triggering which reduces user hand fatigue.